Basic Info.
Type
Network Cable Repeater
Transmission Medium
CAT-5
Lightning Protection
With Lightning Protection
Transport Package
Gift Box
Product Description
70m HDMI Extender 1.4v with POE 4Kx2KI. IntroductionThe cat5e/cat6 HDMI Extender is a tool which can extend your HDMI signal over 230fts/70meters to a compatible display. It is designed to convert HDMI signal to standard HDMI signal which can be transmitted by LAN cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 230fts outside, also you can control the Sink in the Source side which is 230fts outside by using the HDMI Extender. II. Features- POE (Power Over Ethernet) function is supported, either TX or RX is powered by24V@1A power supply, the another does not need power supply from the DC jack. POE Power consumption is less than 10W. See the description 1
- Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distance transmission.
- UTP termination follows the standard of direct interconnection method.
- Transmission distance: Over CAT6 cable
70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.- Support display resolutions up to 4K x 2K@30Hz
- Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels,
3D 1080P60Hz and 4K x 2K@30Hz@24bit- Transfer Bidirectional Infrared control signal together with the HDMI signal.
See the description 2.- Transfer Bidirectional RS232 control signal together with the HDMI signal.
See the description 3.III. Package- HDMI Extender Transmitter ------------------------------------------ 1PC
- HDMI Extender Receiver ---------------------------------------------- 1PC
- Wideband IR Tx --------------------------------------------------------- 2PCS
- Wideband IR Rx --------------------------------------------------------- 2PCS
- 24V1A DC Power Supply ---------------------------------------------- 1PC
- Operation Manual ------------------------------------------------------ 1PC
- Mounting ears------------------------------------------------------------4PCS
IV. Specifications- Frequency Bandwidth 297MHz[10.2Gbps]
- Transmitter Input/Output 1x HDMI Female port/1xCAT6
1x IR Tx/1x IR Rx/1xPhoenix- Receiver Input/Output Ports 1xHDMI Female port/1xCAT6
1x IR Tx/1x IR Rx/1xPhoenix- Power Supply DC 24V 1A
- ESD Protection ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)- Dimensions (mm) 65(W) X 115 (D) X 17 (H)
- Weight 200g x 2
- Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
- Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
- Relative Humidity 20~90% RH (Non-condensing)
- Power Consumption (Max) 20W
V. Operation controls and FunctionsTransmitter - POWER: This LED illuminates when the device is connected with power supply.
- DC 24V: Plug the 24V DC power supply into the unit.
- HD BaseT OUT: Standard HD BaseT signal output port. Connect HD BaseT receiver with a UTP cable following the standard of direct interconnection method.
- HDMI IN: HDMI input port. This slot is where you connect the HDMI source.
- IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx.
- IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
- RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
- Connection Signal Indicator Lamp
Illuminate: The Transmitter and Receiver are in good connections status.Flashing: The Transmitter and Receiver are in poor connections status.Dark: The Transmitter and Receiver are not connected.- Data Signal Indicator Lamp
Illuminate: The HDMI signal with HDCP.Flashing: The HDMI signal without HDCP.Dark: No HDMI signal.Receiver - POWER: This LED illuminates when the device is connected with power supply
- DC 24V: Plug the 24V DC power supply into the unit.
- HD BaseT IN: Standard HD BaseT signal input port. Connect HD BaseT transmitter with a UTP cable following the standard of direct interconnection method.
- HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable.
- IR IN: Channel 1 IR Receiver. Connect with Wideband IR Rx.
- IR OUT: Channel 2 IR Transmitter. Connect with Wideband IR Tx.
- RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
- Connection Signal Indicator Lamp
Illuminate: The Transmitter and Receiver are in good connections status.Flashing: The Transmitter and Receiver are in poor connections status.Dark: The Transmitter and Receiver are not connected.- Data Signal Indicator Lamp
Illuminate: The HDMI signal with HDCP.Flashing: The HDMI signal without HDCP.Dark: No HDMI signal.
VI. Application Example
Address:
B323, Mingyoucaigouzhongxin, Baoyuan Road, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Service
Company Introduction:
Mealink Electronics (Shenzhen) is a high-tech company specialized in digital Audio/video techniques. Our products include series of HDMI products, video converter, extender, VGA/Component/DVI/USB related splitter, swtich, extender, cables, etc. Our products can distribute, convert, amplify and extend HDMI signal under all kinds of A/V signal standards′ encryption and decryption requests. It includes HDMI switch, HDMI splitter, HDMI extender, HDMI matrix, HDMI cable, etc. Our products cover a wide range of application which can offer the solutions for the following products and project application: HDTV digital STB, DVD, Projector, Multi-media Conference Room, Command Center, Multi-media classroom, conference room, data center control, information distribution.
Our Culture and Goal At Mealink, our culture help us attract lots of clients and maintain close relationship. Our clients′ interests always come first and we take "Client Focus, Entrepreneurial Spirit and Teamwork" as tenet, dedicating to provide advanced products and excellent service to our clients. Our consistent goal is to be a true leader of technologies used in industry around the world.
Research We believe that R&D activities continue to grow in importance as the way to be prepared for the future. We strive to understand what consumers need and provide new products accordingly in time. We spent 20 percent of our profits in R&D every year and 1/4 of our employees are engaged in R&D directly in our R&D Center. Mealink continues to increase R&D spending and is committed to leading technology