Basic Info.
Home Audio & Theater Speaker Mount
Ceiling
Home Audio & Theater Watts Per Channel
<50W
Player Type
Blue-Ray Player
Speaker System Audio Output Mode
Stereo
Single Link Range
1080P/60, 12 Bit Color Depth
Romote Control
Bi-Directional IR System
Specification
CE, FCC, RoHS
Product Description
100m/328ft over Single Coaxial Cable HDMI Extender(Bi-directional IR+EDID)
1.IntroductionThe HDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to100m away. The HDMI Over Single Coax Extender supports HDMI 1.3 and HDCP 1.1 with features such as Deep Color and 1080p.By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber. The Extender includes two units: transmitter and receiver. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The Extender offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and is the perfect solution for any application. 2.Features1. Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable. 2. Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable with zero signal loss.3. Single Link Range: 1080p/60, 12 bit color depth.4. Compliant with HDMI 1.3, HDCP 1.1 standards.5. Supports digital video formats in Deep Color Mode at up to 12bits/color.6. Supports PCM 48KHz audio.7.Supports Cascade function in Transmitter and Receiver and it is easy to build a network system by installer.8.Lip-Sync Pass Through.9.Bi-directional IR system allowing for control of source or display (IR accessories included)3.Package Contents: (1) [TX & RX](2) IR Blaster (TX) (2) IR Receiver (RX) (2) DC 5V in line power supply(1)User Manual 4.SpecificationFrequency Bandwidth | 225MHz/link (HDMI 1.3) |
In/Output Support Resolution | 480i, 576i, 720p@50/59.94,60 1080i@50/59.94/60 1080p@23.98/24/25/29.97/30/50/59.94/60 |
Input TMDS Signal: | 3.3 volts |
Input DDC Signal: | 5.0 volts/P-P |
ESD Protection Human body model | ±8kV (air-gap discharge) ±4kV (contact discharge) |
Coaxial Cable Distance | Full HD up to 100M (RG-6U cables) HD up to 200M (RG-6U cables) SD up to 300M (RG-6U cables ) |
Dimension (mm) | 100(D)x105(W)x25(H) |
Weight (g) | 280 |
Power Supply: | (2) 5V1A DC |
Power consumption: | 2.3 watts (TX); 2.2 watts (RX) |
Operation temperature: | 32~104 °F |
Storage temperature: | -4 ~140 °F |
Relative humidity: | 20~90 % RH (no condensation) |
5.Operation Controls and Functions1.Transmitter Front Panel Rear Panel
1. LINK LED:This LED will illuminate when the device is connected with HDMI source2. HDMI IN: This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission.3. IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.4. IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.5. EDID: The EDID switch allows to pre-set an EDID to encourage a "handshake" between the display and source. Position | EDID Description |
0 0 | 1080p, 2CH PCM 48KHz |
0 1 | 1080p, 5.1CH PCM 48KHz |
1 0 | 1080p, 7.1CH PCM 48KHz |
1 1 | 1080i, 2CH PCM 48KHz |
Power LED: This red LED will switch on when the device is connected with the power supply.1). DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.2). Coax Out : Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.1. Receiver
Front Panel Rear Panelu LOCK LED: This LED will illuminate when the HDMI signal from the transmitter is stable.u HDMI Out: This slot is where you connect a HDMI display with a HDMI cable .u IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.u IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.u Power LED: This red LED will switch on when the device is connected with the power supply.u DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.u Coax IN: Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.u LOOP OUT: Connect one 75ohm RG-6U coax cable between the receiver with the next receiver BNC port. 6, Wideband IR(20KHz---60KHz) Introduction IR RECEIVER (RX)To control the source: Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.To control the display: Plug IR Receiver into IR RX port of transmitter unit; place receiver in position where it is able to receive remote signals. IR BLASTER (TX)To control the source: Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of the IR eye of the source.To control the display: Plug IR Blaster into IR TX port of receiver unit; place blaster in front of the IR eye of the display. 7. Connection and Installation
Address:
B323, Mingyoucaigouzhongxin, Baoyuan Road, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Service
Company Introduction:
Mealink Electronics (Shenzhen) is a high-tech company specialized in digital Audio/video techniques. Our products include series of HDMI products, video converter, extender, VGA/Component/DVI/USB related splitter, swtich, extender, cables, etc. Our products can distribute, convert, amplify and extend HDMI signal under all kinds of A/V signal standards′ encryption and decryption requests. It includes HDMI switch, HDMI splitter, HDMI extender, HDMI matrix, HDMI cable, etc. Our products cover a wide range of application which can offer the solutions for the following products and project application: HDTV digital STB, DVD, Projector, Multi-media Conference Room, Command Center, Multi-media classroom, conference room, data center control, information distribution.
Our Culture and Goal At Mealink, our culture help us attract lots of clients and maintain close relationship. Our clients′ interests always come first and we take "Client Focus, Entrepreneurial Spirit and Teamwork" as tenet, dedicating to provide advanced products and excellent service to our clients. Our consistent goal is to be a true leader of technologies used in industry around the world.
Research We believe that R&D activities continue to grow in importance as the way to be prepared for the future. We strive to understand what consumers need and provide new products accordingly in time. We spent 20 percent of our profits in R&D every year and 1/4 of our employees are engaged in R&D directly in our R&D Center. Mealink continues to increase R&D spending and is committed to leading technology